Contact Us

Company Name: Nanjing Huiguang Lighting Co.,Ltd

Address: #10 Kaicheng Road, Jiangning District,Nanjing,China

Post Code: 211135

Tel: 0086-25-86809939

Mob: +86-13400059595

E-mail: admin@light-hg.com

Home > News > Content

LED Bulbs Are More Energy Efficient And Safer

Nanjing Huiguang Lighting Co.,Ltd | Updated: Oct 11, 2017

What are the advantages and disadvantages of the LED bulb, which is gradually emerging in the market, compared with the energy-saving lamps and incandescent lamps? Recently, Jiangsu Province Bureau of Quality Supervision announced the first quarter LED lighting product quality analysis report showed that, compared with the incandescent lamp, energy-saving lamps, LED lighting is more secure, and more energy, but the color index still has a larger space to promote.

According to the sampling of 103 batches of LED bulbs, of which 53 of the products produced by the enterprises in the province, the pass rate was 88.7%; 50 batches of product quality risk monitoring of the market, the pass rate was only 30%, there are more quality problems.

The national semiconductor lighting product quality inspection center deputy director said that, compared with incandescent lamps, energy-saving lamps, LED light bulb is more safe. This is because a single LED power consumption is very low, high-power LED consumption of electricity is generally not more than 1W, the requirements of the conductive line is not high, less aging caused by short-circuit fault. Moreover, the LED bulb is completely encapsulated in epoxy resin, which is stronger than the bulb and fluorescent tube, and there is no loose part in the lamp body. These characteristics make the LED light bulb not easily broken and damaged.

In addition, the LED light source is low voltage microelectronic products, and the working voltage of LED is 2-3.6V, which belongs to the extremely low safety voltage, and no shock accident occurs when the light source is replaced. Because the LED bulb belongs to a cold light source, the condition that the surface temperature of the incandescent lamp and the gas discharge lamp is too high can not occur.